Henry Moore: Sculptural Process and Public Identity

ISBN 978-1-84976-391-2

Henry Moore OM, CH Two Piece Reclining Figure No.3 1961, cast date unknown

The space separating the upper body and legs of this reclining figure serves to disconnect the body into singular parts, and has encouraged commentators to align this sculpture with Moore’s interest in geological formations and impressionist paintings of cliffs.
Henry Moore OM, CH 1898–1986
Two Piece Reclining Figure No.3
1961, cast date unknown
Bronze
1585 x 2800 x 1370 mm
Inscribed ‘Moore 0/7’ and stamped with foundry mark ‘H. NOACK BERLIN’ on side of legs
Presented by the artist 1978
Artist’s copy aside from an edition of 7
T02287

Entry

Two Piece Reclining Figure No.3 is the third of four large-scale two-part sculptures made by Henry Moore between 1959 and 1961.1 This series represented a major development in Moore’s treatment of the reclining figure, a subject that preoccupied him throughout his career. In this work the bronze figure has been divided into two separate parts positioned on a base: one rises vertically to a central point and may be understood to represent a head, shoulders and torso, while the other takes the form of a solid block marked by deep gouges and occupies the position of the legs. The front of the sculpture is usually understood to be the view where the taller upper body section is on the left and the leg section on the right.
Fig.1
Detail of head of Two Piece Reclining Figure No.3 1961, cast date unknown (front view)
Tate T02287
© The Henry Moore Foundation. All Rights Reserved
Fig.2
Detail of head of Two Piece Reclining Figure No.3, cast date unknown (rear view)
Tate T02287
© The Henry Moore Foundation. All Rights Reserved

Fig.3
Detail of upper body of Two Piece Reclining Figure No.3 1961, cast date unknown
Tate T02287
© The Henry Moore Foundation. All Rights Reserved
The head of the figure is rendered as a thin, upright protrusion emerging from a broad, smoothly rounded horizontal ridge representing shoulders. The only suggestion of a facial feature is a small, round indentation in the front (fig.1), while the back of the head is marked by several sharp ridges and a deep gouge (fig.2). The right shoulder extends down to form a recognisable arm shape, bent at the elbow so that the forearm rests on the base. The curve of this arm is accentuated by a hole that pierces the centre of the torso, while a block-like hand at the end of this arm connects to another horizontal appendage that might be either the left arm or abdomen. Although the form contains rounded surfaces, from the rear this upper body can be seen to feature a number of straight edges (fig.3). As well as the almost square-shaped hole that runs through the torso, a deep recess with straight edges marks a space between the shoulders, while both flanks appear to extend vertically downwards before turning at right-angles with the base.
The outline of the other piece also equates to a roughly shaped cuboid form. It is formed of one solid piece of bronze, and features deep vertical gouges and channels that cut into its core. From the rear two individual legs may be identified, separated by a deep incision (fig.4). Their diagonal orientation suggests that they may be calves of legs bent at the knees, although the irregular outline of this block makes them hardly legible as such.
Fig.4
Two Piece Reclining Figure No.3 1961, cast date unknown (rear view)
Tate T02287
© The Henry Moore Foundation. All Rights Reserved
Fig.5
Two Piece Reclining Figure No.3 1961, cast date unknown (rear angled view)
Tate T02287
© The Henry Moore Foundation. All Rights Reserved


Although the side of the sculpture from which the figure’s arm is visible is usually presented and photographed as its front, Moore consciously sculpted the forms to be experienced in the round. Indeed, the need to make imaginative leaps in order to establish a coherent image of the body appears to have shaped a number of Moore’s formal decisions. The gap separating the two parts of this sculpture and the use of crevices and hollows point to the importance of negative space as something that unites as well as divides the various elements of the sculpture. For example, from the rear the arrangement of forms is perhaps more easily recognisable as a single figure, in that the almost horizontal protrusion from the top of the legs appears to bridge or lock the gap between this section and the upper body (fig.5). It is also from this angle that the figure may be identified as female, for the left shoulder may also represent a breast at the same height as the protrusion from the sternum.

From plaster to bronze

Moore began developing ideas for two-piece reclining figures in 1959 with a series of small plaster maquettes. By the 1950s Moore had moved away from making preliminary drawings for his sculptures and had started making small three-dimensional models in clay, plaster, wax and plasticine. It is likely that he made the maquettes for his two-piece sculptures in the maquette studio on the grounds of his home, Hoglands, at Perry Green in Hertfordshire. This studio was lined with shelves displaying Moore’s ever growing collection of found bones, shells and pebbles, the shapes of which often served as starting points for Moore’s formal experiments in three dimensions. In 1968 Moore explained to the photographer John Hedgecoe:
I like this little studio. I am always very happy there. I like the disarray, the muddle and the profusion of possible ideas in it. It means that whenever I go there, within five minutes I can find something to do which may get me working in a way that I hadn’t expected and cause something to happen that I hadn’t foreseen.2
Henry Moore 'Two Piece Reclining Figure: Maquette No.3' 1961
Fig.6
Henry Moore
Two Piece Reclining Figure: Maquette No.3 1961
The Henry Moore Foundation
© The Henry Moore Foundation. All Rights Reserved
Photo: Alice Correia
Henry Moore 'Two Piece Reclining Figure: Maquette No.1' 1960
Fig.7
Henry Moore
Two Piece Reclining Figure: Maquette No.1 1960
Dallas Museum of Art
© The Henry Moore Foundation. All Rights Reserved


The maquette for Two Piece Reclining Figure No.3 (fig.6) was made in 1961. Some of the other maquettes for two-piece sculptures made around this time, such as Two Piece Reclining Figure: Maquette No.1 1960 (fig.7), were cast in bronze at their original size, but not all of them were scaled up into full size sculptures. Moore explained:
Sometimes I make ten or twenty maquettes for every one that I use in a large scale – the others may get rejected. If a maquette keeps its interest enough for me to want to realise it as a full-size final work, then I might make a working model in an intermediate size, in which changes will be made before going to the real, full-sized sculpture. Changes get made at all these stages.3
When Moore finished the maquette for Two Piece Reclining Figure No.3 he applied colour to the white plaster to gauge what it might look like in bronze. The maquette would then act as the template for the large-scale sculpture. By systematically measuring specific points on the surface of the maquette the design could be enlarged while retaining its original proportions. The enlargement process would probably have been carried out in the White Studio, also situated in the grounds of Hoglands, by Moore’s sculpture assistants, who in 1961 were Clive Sheppard and Bill Smith.
In order to make the full-size plaster from which the bronze was cast, Moore and his assistants would have initially constructed a wooden armature to the required size and shape for each section of the sculpture. The armatures were made up of numerous lengths of wood and possibly chicken wire, and then draped or wrapped in scrim, a bandage-like fabric. Layers of plaster could then be applied to the armature while its interior remained hollow.
John Hedgecoe
Fig.8
John Hedgecoe
Henry Moore working on the plaster torso section of Two Piece Reclining Figure No.3 1961
© The Henry Moore Foundation. All Rights Reserved
Moore’s assistants would have completed most of the preliminary work for Two Piece Reclining Figure No.3, including applying successive layers of plaster to the armature and scrim until only a short section of each armature rod was exposed. The armature not only served a structural purpose; the end of each rod corresponded to a point on the surface of the sculpture as measured and multiplied from the maquette. Moore explained that ‘once they [the assistants] have brought the work within an inch or so of the measurements I intend it to be, I take it over, and then it becomes a thing I’m working on as it would if I had brought it to that stage myself’.4 John Hedgecoe photographed Moore working on Two Piece Reclining Figure No.3 while the torso section was laid on its back (fig.8). During this final stage Moore began to work into the surface of the sculpture. Using an array of tools including saws, trowels and a hand pickaxe different marks and textures could be achieved depending on the wetness of the plaster as it dried. Moore found plaster to be a very useful material because it could be ‘both built up, as in modelling, or cut down, in the way you carve stone or wood’.5
After it was finished the full-size plaster was sent to the Noack Foundry in West Berlin to be cast in bronze. During the 1950s and early 1960s Moore used a number of different foundries in London and Paris, but started working with Noack in 1958 following an introduction by the dealer Harry Fischer.6 By the 1950s Noack was regarded as one of the best foundries equipped to undertake large-scale bronze castings. Moore dealt with its owner Herman Noack directly and paid for the casting of his sculptures himself. In 1967 Moore stated: ‘I use the Noack foundry for casting most of my work because in my opinion, Noack is the best bronze founder I know ... Also, the Noack foundry is reliable in all ways – in keeping to dates of delivery – and in sustaining the quality of their work’.7
It is likely that Noack used the lost wax technique to cast the bronze sculpture. This would have required the foundry to carve up the plaster into sections and create moulds from each piece. The inside of each mould would then be ‘greased’ with a releasing agent before molten wax was poured into it. Once the wax had hardened it could be released from the mould, forming an exact replica of the sculpture in wax. The wax would then be encased in a hard refractory material, placed in a kiln and heated until it melted. Channels within the casing would allow the wax to drain away and, once empty, the cavity was filled with molten bronze. When the bronze had hardened its casing was removed, revealing a section of sculpture. After every piece of the sculpture had been cast in this way they would be welded together. Finally, the casting seams would have been filed down until the joints between each section of the cast were practically imperceptible.
After it was reassembled at the foundry the bronze sculpture was returned to Moore so that he could inspect its quality and make decisions about its patination. A patina is the surface colour of a sculpture and is usually achieved by applying chemical solutions to the bronze surface. In 1963 Moore stated that ‘I always patinate bronze myself’, going on to explain that since he had conceived the sculpture it would be unlikely that anyone else would be able to replicate the exact colour he wanted.8 Bronze is an alloy of copper and tin and the patina of bronze sculptures displayed outdoors changes over time due to reactions between the metal and chemicals in the air. Tate’s cast is a fairly uniform dark brown colour, which is maintained by regular waxing and cleaning. Nonetheless, periods of exposure to the weather have caused areas of pale green to appear on the sculpture’s surface.

Sources and development

During an interview in 1962, the year after Two Piece Reclining Figure No.3 was made, Moore stated:
The Two-Piece Reclining Figures must have been working around in the back of my mind for years, really. As long ago as 1934 I had done a number of smaller pieces composed of separate forms, two- and three-piece carvings in ironstone, ebony, alabaster and other materials. They were all more abstract than these. I don’t think it was a conscious or intentional thing for me to break up the figures in this way, but I suppose those earlier works from the thirties had something to do with it. I didn’t do any preliminary drawings for these. I wish now I had ... I did the first one in two pieces almost without intending to. But after I’d done it, then the second one became a conscious idea. I realised what an advantage a separated two-piece composition could have in relating figures to landscape. Knees and breasts are mountains. Once these two parts become separated you don’t expect it to be a naturalistic figure; therefore, you can justifiably make it like a landscape or a rock. If it is a single figure, you can guess what it’s going to be like. If it is in two pieces, there’s a bigger surprise, you have more unexpected views; therefore the special advantage over painting – of having the possibility of many different views – is more fully exploited.9
In his statement Moore acknowledged that although his first bronze two-piece reclining figure was made in 1959, his interest in broken or dismembered figures stemmed back to the early 1930s. One of Moore’s best known sculptures from that period is Four Piece Composition: Reclining Figure 1934 (fig.9), in which the reclining figure is separated into four distinct components spread out along a plinth. In 1968 Moore explained that in 1933–4 ‘I began separating forms from each other in order to be able to relate space and form together’.10 Although this retrospective explanation of the 1934 work may have been influenced by the two- and three-piece sculptures Moore was making at the time, it nonetheless suggests a degree of formal continuity between bodies of work made almost thirty years apart.
Henry Moore 'Four-Piece Composition: Reclining Figure' 1934
Fig.9
Henry Moore
Four-Piece Composition: Reclining Figure 1934
Tate T02054
© The Henry Moore Foundation. All Rights Reserved

When Moore began working on a much larger scale in the 1950s, his interest in the compositional potential of space developed to account for the viewer’s changing physical relationship to the object. He noted in 1968 that:
a sculpture in two pieces means that, as you walk round it, one form gets in front of the other in ways you cannot foresee ... The space between the two parts has to be exactly right. It’s as though one was putting together the fragments of a broken antique sculpture in which you have, say, only the knee, a foot and the head. In the reconstruction the foot would have to be the right distance from the knee, and the knee the right distance from the head, to leave room for the missing parts – otherwise you would get a wrongly proportioned figure.11
Moore’s comments illustrate how much attention he paid to the sense of scale and the bodily proportions of his figurative sculptures. Yet, as in many of Moore’s sculptures, the head of Two Piece Reclining Figure No.3 seems disproportionately small when compared to the bulky mass of the body. Moore explained this formal decision, stating that ‘actually, for me the head is the most important part of a piece of sculpture. It gives to the rest a scale, it gives to the rest a certain human poise, and meaning, and it’s because I think that the head is so important that often I reduce it in size to make the rest more monumental’.12
Henry Moore 'Warrior with Shield' 1953–4
Fig.10
Henry Moore
Warrior with Shield 1953–4
Birmingham Museums and Art Gallery
© The Henry Moore Foundation. All Rights Reserved
The gouge in the head of Two Piece Reclining Figure No.3 may be linked to the deformed head of Moore’s earlier bronze Warrior with Shield 1953–4 (fig.10). In this work a large gash runs from the crown of the figure’s head to its nose, and this implication of bodily trauma is accentuated by the figure’s missing limbs. Viewed in light of this work, the damage evoked by the modelling of the head in Two Piece Reclining Figure No.3 may support critic John Russell’s assertion that what the two-piece sculptures ‘stand for, fundamentally, is the ability of the human body to survive and dominate, no matter how catastrophic its surroundings. Fragmentary and ruinous as is the condition of these huge carcasses, their aspect is not one of collapse’.13
Moore also found that dividing the body into separate components released it from the immediate constraints of naturalistic representation. In pieces, the body could be more easily modified to incorporate and suggest foreign forms, such as geological formations and landscapes. Moore’s interest in landscapes and natural forms dates back to the late 1920s when he started collecting pebbles, shells and bones, and his sketchbooks from the early 1930s contain studies of these objects that have been altered imaginatively to evoke human characteristics.
Henry Moore 'Reclining Woman (Mountains)' 1930
Fig.11
Henry Moore
Reclining Woman (Mountains) 1930
National Gallery of Canada, Ottawa
© The Henry Moore Foundation. All Rights Reserved
The analogies that Moore drew in his 1962 interview between features of the body and natural formations – ‘knees and breasts are mountains’ – also find a precedent in earlier work by Moore. For example, the title of Reclining Woman (Mountains) 1930 alludes to the undulating landscape suggested by its head, breasts and knees (fig.11). The critic Robert Melville was willing to go further in 1970 when he suggested that, rather than making analogies between the female reclining body and landscapes as he did in Reclining Woman (Mountains), Moore’s two- and three-piece sculptures actually present landscapes that recall the female form: ‘They are images of rocky landscapes which bear an “accidental” resemblance to woman’.14 Similarly, the curator Alan Bowness remarked in 1977 that, ‘In the earliest two-piece reclining figures, Moore stressed the landscape metaphor that had always been a rich source of inspiration. In places the figure is transformed into a cliff or a cave, an interpretation supported by the treatment of the bronze surface’.15 Nonetheless, according to the filmmaker John Read, ‘the comparison between the human figure and the rolling slopes of hills or the worn-down shapes of boulders is inescapable. This blending of human and natural form, this ability to see figures in the landscape, and a landscape in the figures, is Moore’s greatest contribution to sculpture. His works are literally landmarks’.16
In a statement written in 1961 to Martin Butlin, Assistant Keeper of the Tate collection, Moore described his two-piece reclining figures:
in my reclining figures, I have often made a sort of looming leg – the top leg in the sculpture projecting over the lower leg, which gives a sense of thrust and power – as a large branch of a tree might move outwards from the main trunk – or as a seaside cliff might overhang from below, if you are on the beach.17
Moore’s description of the ‘projecting’ or ‘looming leg’, and the likeness he proposed between this feature and an overhanging cliff might illuminate the formal relationship established by the overhanging element in the leg piece of Two Piece Reclining Figure No.3. Indeed the analogy of a cliff leaning out over the sea has been productive for several writers on Moore’s work, including Herbert Read, Robert Melville and Alan Wilkinson, all of whom found parallels between his sculptural forms and the depiction of cliffs in paintings by Claude Monet and Georges Seurat.18 Seurat’s Le Bec du Hoc, Grandcamp 1885 (fig.12) was previously owned by Moore’s close friend, the art historian Kenneth Clark, and it is known that Moore saw it during his regular visits to Clark’s home.19
Georges Seurat 'Le Bec du Hoc, Grandcamp' 1885
Fig.12
Georges Seurat
Le Bec du Hoc, Grandcamp 1885
Tate N06067
John Hedgecoe 'Adel Crag'
Fig.13
John Hedgecoe
Adel Crag
© The Henry Moore Foundation. All Rights Reserved


The critics Phillip James and Donald Hall have both proposed that, in addition to French impressionist paintings and Moore’s sculptures from the 1930s, the forms of Two Piece Reclining Figure No.3 may have been informed by the shape of Adel Crag, a large outcrop of rock on Adel Moor, near Leeds (fig.13). Hall described this natural formation as comprising ‘two huge rocks ... one is narrow and vertical; the other is split, enormous and jagged’, and suggested that it was difficult to look at Adel Crag without seeing a Henry Moore sculpture.20 Moore had visited the rock formation as a school child and claimed that the experience left an indelible mark on his appreciation of natural forms.21
Henry Moore 'Stone Memorial' 1961–9
Fig.14
Henry Moore
Stone Memorial 1961–9
National Gallery of Art, Washington D.C.
© The Henry Moore Foundation. All Rights Reserved
Rock formations not only provided a point of reference for Two Piece Reclining Figure No.3 but also Stone Memorial 1961–9 (fig.14). Moore created the preliminary maquette for this sculpture in 1961, and the large-scale carving in travertine marble resembles the leg section of Two Piece Reclining Figure No.3. In 1979 the curator Anne Bromberg drew analogies between Moore’s sculptures resembling rocks and ancient standing stones when she suggested that Two Piece Reclining Figure No.3 ‘as a whole has the force of primitive mythology. The figure is as timeless as Stonehenge and as impersonal as gods of nature’.22 Moore first visited Stonehenge in Wiltshire in 1921 and over the subsequent years made several works that tacitly reference the standing stones, which he also represented explicitly in 1973 with a series of lithographs.23 According to the critic Peter Fuller and the art historian Christa Lichtenstern, Moore’s interest in Stonehenge aligned him with a British Romantic landscape tradition that stemmed back to the late eighteenth century and to artists such as John Constable and William Blake (both of whom painted Stonehenge).24 The canonical figures of the Romantic movement are commonly understood to have claimed ‘a new intuition for the primal power of the wild landscape, the spiritual correspondence between Man and Nature, and the aesthetic principles of “organic” form’.25 Moore’s adherence to such ideas was noted by some of his contemporaries, as his inclusion in John Piper’s 1942 book British Romantic Artists attests. In this book Piper asserted that Moore, along with Paul Nash and Graham Sutherland, utilised imagery derived from natural landscapes to address larger existential questions.26
In the exhibition catalogue for Moore’s retrospective exhibition at the Tate Gallery in 1968, the curator David Sylvester suggested an additional lens through which to interpret Moore’s two-piece reclining figures of 1959–61. Sylvester asserted that ‘on the whole this series presents by far the most specifically sexual imagery in Moore’s work’, explaining that what Moore described as a looming leg or tree branch could in fact be understood as a phallus.27 According to Sylvester, in the case of works such as Two Piece Reclining Figure No.3, ‘where there is no total equation of one part of the figure with the phallus, the torso part is likely to have a phallic appendage directed at the lower part. The appendage may in the first place be a truncated thigh’.28 Sylvester supported his claim with reference to a drawing made by Moore in 1961 called Two Reclining Figures (fig.15), which features a sketch in the lower half of the page that Sylvester associated with the act of fellatio: ‘the lower half is a huge mouth opened wide to receive an inexplicably elongated form sticking out of the torso’.29
Henry Moore 'Two Reclining Figures' 1961
Fig.15
Henry Moore
Two Reclining Figures 1961
The Henry Moore Foundation
© The Henry Moore Foundation. All Rights Reserved
Photo: Menor, Henry Moore Foundation Archive
Henry Moore 'Two Forms' 1934
Fig.16
Henry Moore
Two Forms 1934
Museum of Modern Art, New York
© The Henry Moore Foundation. All rights reserved


Sylvester’s account privileges the idea that the two parts of Moore’s Two Piece Reclining Figure No.3 interlock, evoking the mechanics of sexual intercourse. Nonetheless, he also acknowledged that ‘at the same time there is a contrary suggestion of a mother-and-child relationship’ as seen in the earlier Two Forms 1934 (fig.16).30 Moore had suggested that this earlier wooden sculpture could be ‘thought of as a Mother and Child ... The bigger form has a kind of pelvis shape in it and the smaller form is like the big head of a child’.31 With this in mind, the two horizontally protruding elements in Two Piece Reclining Figure No.3 could be regarded as a complementary pair rather than sections of a single figure. Indeed, as John Russell remarked in 1973, the division of the sculpture into two embodies ‘the idea of irreparable separation and loss which is fundamental to all human experience; and art’s highest function is fulfilled when we look again and realise that the two pieces have an intense and living relationship, as separate entities, which would be dulled and rendered inert if they were to be joined together’.32

The Henry Moore Gift

Fig.17
Installation view of the exhibition The Henry Moore Gift, Tate Gallery, 1978
Tate
© The Henry Moore Foundation. All Rights Reserved
Two Piece Reclining Figure No.3 was presented by Henry Moore to the Tate Gallery in 1978 as part of the Henry Moore Gift. The Gift comprised thirty-six sculptures in bronze, marble and plaster and was exhibited in its entirety alongside Tate’s existing collection of Moore’s work in an exhibition celebrating the artist’s eightieth birthday, which opened in June 1978. A press release was duly prepared announcing that ‘The group [of sculptures] is the most substantial gift of works ever given to the Tate by an artist during his lifetime’.33 Two Piece Reclining Figure No.3 was exhibited in gallery twenty-one alongside Large Slow Form 1962–8, cast 1968 (Tate T02290) and Working Model for Knife-Edge Two-Piece 1962, cast 1963 (Tate T00603) (fig.17). The exhibition was attended by over 20,500 people and nearly 11,000 copies of the catalogue were sold.34 At its close in late August the Director of Tate, Norman Reid, reflected in a letter to Moore’s daughter Mary Danowski that although he was sad to see the exhibition come to an end ‘we have the consolation of the splendid group of sculptures which Henry has presented to the nation’.35
After the 1978 exhibition Tate decided that it should lend certain large-scale works from the Henry Moore Gift to regional galleries in the United Kingdom on a long-term basis.36 In August 1978 the Assistant Director of Tate Judith Jeffreys wrote to the collector Robert Sainsbury with a list of seven sculptures that had been identified as suitable for long-term loans. In 1977 Robert and Lisa Sainsbury had given their collection of modern and non-Western art to the University of East Anglia, Norwich, where it was housed in the purpose built Sainsbury Centre for Visual Art, designed by the architect Norman Foster. On receipt of Jeffrey’s letter, Robert Sainsbury personally selected Two Piece Reclining Figure No.3 for display outside the new gallery. By 27 September the loan had been agreed and quotes for transporting the sculpture from London to Norwich had been obtained.
In a letter to Norman Reid dated 28 November 1978 Moore stated, ‘I am pleased indeed that you agreed to lend Two Piece Reclining Figure No.3 to the Sainsbury centre. I went to Norwich with Bob and Lisa to help fix the exact siting, and I think it is going to look very nice there’.37 Moore had been friends with Robert and Lisa since the 1930s and was godfather to their son David. The Sainsburys had also been important and influential early collectors of Moore’s work and his drawings and sculptures were a fixture of their vast collection. Moore, the Sainsburys and Foster decided to position the sculpture in front of the large south window of the gallery on a lawn leading to a lake, and on 4 April 1979 it was installed on a plinth designed by Foster Associates in consultation with Moore. In 1989 the sculpture was moved from this location due to the construction of the Sainsbury Centre’s Crescent Wing extension, and was relocated in 2006 to a site between the gallery and Constable Terrace, the University’s hall of residence.
Two Piece Reclining Figure No.3 was cast in an edition of seven plus one artist’s copy. Tate’s bronze is numbered ‘0/7’, indicating that it is the artist’s copy. Other casts are held in the Gwendolyn Weiner Collection, on permanent loan to the Palm Springs Desert Museum, Palm Springs; Everson Museum of Art in Syracuse; SITOR in Turin; City of Gothenburg; Franklin D. Murphy Sculpture Garden at the University of California, Los Angeles; Brandon Estate in south London; and the Dallas Museum of Art.

Alice Correia
July 2012

Notes

1
The other works in this series are Two Piece Reclining Figure No.1 1959 (Chelsea School of Art, London), Two Piece Reclining Figure No.2 1960 (Tate T00395), and Two Piece Reclining Figure No.4 1961 (Wakefield Art Gallery).
2
Henry Moore cited in John Hedgecoe (ed.), Henry Moore, London 1968, p.266.
3
Moore cited in Gemma Levine, With Henry Moore: The Artist at Work, London 1978, p.57.
4
Moore cited in Donald Hall, ‘Henry Moore: An Interview by Donald Hall’, Horizon, November 1960, reprinted in Alan Wilkinson (ed.), Henry Moore: Writings and Conversations, Aldershot 2002, p.226.
5
Moore cited in Hedgecoe 1968, p.300.
6
See Roger Berthoud, The Life of Henry Moore, 1987, 2nd edn, London 2003, pp.323–4.
7
Henry Moore, letter to Heinz Ohff, 8 March 1967, Henry Moore Foundation Archive.
8
Moore cited in ‘Henry Moore Talking to David Sylvester’, 7 June 1963, transcript of Third Programme, BBC Radio, broadcast 14 July 1963, pp.3–4, Tate Archive TGA 200816.
9
Carlton Lake, ‘Henry Moore’s World’, Atlantic Monthly, vol.209, no.1, January 1962, p.44.
10
Moore cited in Hedgecoe 1968, p.75.
11
Ibid., p.349.
12
Henry Moore cited in Hugh Burnett (ed.), Face to Face: Interviews with John Freeman, London 1964, p.34.
13
John Russell, Henry Moore, London 1973, p.202.
14
Robert Melville, Henry Moore: Sculpture and Drawings 1921–1969, London 1970, p.29.
15
Alan Bowness (ed.), Henry Moore. Volume 4: Complete Sculpture 1964–73, London 1977, p.9.
16
John Read, Portrait of an Artist: Henry Moore, London 1979, p.82.
17
Henry Moore, ‘Two-Piece Reclining Figures 1959 and 1960’, artist’s statement sent to Martin Butlin, 13 April 1961, Tate Artist Catalogue File, Henry Moore, A23945, reprinted in Mary Chamot, Dennis Farr and Martin Butlin, Tate Gallery Catalogues: The Modern British Paintings, Drawings and Sculpture, London 1964, vol.2, p.28.
18
See Herbert Read, Henry Moore: A Study of His Life and Work, London 1965, p.227; Melville 1970, p.29; and Alan G. Wilkinson, Henry Moore Remembered: The Collection at the Art Gallery of Ontario in Toronto, Toronto 1987, p.193.
19
See Philip James (ed.), Henry Moore on Sculpture, London 1966, p.269.
20
Donald Hall, Henry Moore: The Life and Work of a Great Sculptor, London 1966, p.160.
21
See John Hedgecoe (ed.), Henry Moore: My Ideas, Inspiration and Life as an Artist, London 1986, p.35.
22
Anne Bromberg, A Guide to the Collections: Dallas Museum of Fine Arts, Dallas 1979, pp.112–17.
23
See Henry Moore, Stonehenge 1973, Tate P02169–P02187.
24
See Peter Fuller, ‘Henry Moore: An English Romantic’, in Susan Compton (ed.), Henry Moore, exhibition catalogue, Royal Academy of Arts, London 1988, pp.37–44; and Christa Lichtenstern, Henry Moore: Work-Theory-Impact, London 2008, pp.207–13.
25
Margaret Drabble (ed.), The Oxford Companion to English Literature, Oxford 1985, p.843.
26
John Piper, British Romantic Artists, London 1942.
27
David Sylvester, Henry Moore, exhibition catalogue, Tate Gallery, London 1968, p.93.
28
Ibid.
29
Ibid.
30
Ibid.
31
Moore cited in Hedgecoe 1968, p.76.
32
Russell 1973, p.211.
33
See ‘Note on the Henry Moore Gift’, 1978, Tate Public Records TG 4/6/10/4.
34
These figures are based on those listed in a memo in the exhibition’s records; see Tate Public Records TG 92/344/2.
35
Norman Reid, letter to Mary Danowski, 31 August 1978, Tate Public Records TG 4/6/10/4.
36
See Judith Jeffries, letter to Joanna Drew, 3 October 1978, Tate Public Records TG 4/9/400/1.
37
Henry Moore, letter to Norman Reid, 28 November 1978, Tate Public Records TG/4/9/400/1.

How to cite

Alice Correia, ‘Two Piece Reclining Figure No.3 1961, cast date unknown by Henry Moore OM, CH’, catalogue entry, July 2012, in Henry Moore: Sculptural Process and Public Identity, Tate Research Publication, 2015, https://www.tate.org.uk/art/research-publications/henry-moore/henry-moore-om-ch-two-piece-reclining-figure-no3-r1171997, accessed 29 March 2024.